864 mhz saw filter 12 mhz bandwidth part number: SF0864BA02510S spectrum microwave, inc. 400 nickerson road, marlborough, ma 01752, usa phone 508-251-6400 fax 508-251-6401 www.spectrummicrowave.com dsSF0864BA02510S rev x4 24jan11 page 1 of 3 description 864 mhz saw bandpass filter with 12 mhz bandwidth. 3 x 3 mm ceramic lcc, 6 pads. rohs compliant. typical performance
864 mhz saw filter 12 mhz bandwidth part number: SF0864BA02510S spectrum microwave, inc. 400 nickerson road, marlborough, ma 01752, usa phone 508-251-6400 fax 508-251-6401 www.spectrummicrowave.com dsSF0864BA02510S rev x4 24jan11 page 2 of 3 specification parameter min typ max units center frequency (fc) 1 864 mhz insertion loss (863 to 865 mhz) 2.8 3.5 db passband ripple (863 to 865 mhz) 1 1.8 db input/output vswr (863 to 865 mhz) 2 2.2 :1 rejection (300848 mhz) 2 50 55 db rejection (848853.3 mhz) 2 50 55 db rejection (878882 mhz) 2 50 55 db rejection (8821200 mhz) 2 50 55 db ambient temperature 25 c system source and load impedance 50/0 w /pf notes: 1. average of lower & upper 3 db frequencie s. 2. referenced to 0 db absolute level. maximum ratings parameter min max units storage temperature range 40 85 ?c operating temperature range 40 85 ?c input power level 10 dbm dc permissive voltage 10 v dc matching circuit notes: 1. external matching components are not required. 2 5 1,3,4,6 input 50 w singleended output 50 w singleended gnd gnd
864 mhz saw filter 12 mhz bandwidth part number: SF0864BA02510S spectrum microwave, inc. 400 nickerson road, marlborough, ma 01752, usa phone 508-251-6400 fax 508-251-6401 www.spectrummicrowave.com dsSF0864BA02510S rev x4 24jan11 page 3 of 3 package outline suggested footprint marking all specifications are believed to be accurate and reliable. however, spectrum microwave reserves the right to make changes without notice. ? 2011 all rights reserved. units: mm typical tolerances are 0.15 mm except where indicated. pad configuration: input: 2 output: 5 ground: all other pads package material: body: al 2 o 3 ceramic lid: kovar, ni plated terminations: au plating 1 m min, over a 1.38.9 m ni plating smi 2510 yyww iso 9001 registered
|